Temperature controller heating/cooling mode case

Example of heating mode of thermostat:

For example, how to control the radiator heating to 60 degrees and stop, and then start again at 50 degrees?

It should be heating mode according to the demand, and the temperature return difference is 10 degrees

It should be set as follows

Press and hold SET to display P0 and set the working mode to H

Set P1 return difference to 10

When the temperature is normally displayed, press SET temperature flash once to directly set the stop temperature value to 60 degrees.

Example of cooling mode

For example, control the refrigerator to stop cooling at - 5 ℃, and then start cooling again at 0 ℃?

It should be in refrigeration mode as required, and the temperature return difference is 5 degrees, which should be set as follows

Press and hold SET to display P0 and set the working mode to C

Set P1 return difference to 5

When the temperature is normally displayed, press SET temperature flash once to directly set the stop temperature value to - 5 degrees